Tag Archives: Electricians Tools

Enhance The Beauty Of Backyard Pond With Lights

Leave a reply

A pool in the court at the back of your house not just provides you with a place to relax but also gives you a beautiful and nice look to it. This phenomenon dims down with the downing of the sun.

With some pond lighting, the area will stand out and continue to be a source of pride no matter what the time of day. The article below familiarizes some steps to arrange the lights in the pond.

The tools you might need while arranging the lights in the pond are floating solar pond lights, floating lighted pond fountain, electric or solar, underwater pond light with transformer and electricity source.

Having them all, you can carry on with the project. Float solar lights on the pond surface for a gently moving light display that needs no electrical connection, timers, or switches. Floating lights can be left to move freely. Using floating solar lights illuminates the surface of the water at night with just the power of the sun.

Market provides us a variety of clear and colored lights in various sizes, shapes and also in the shape of water lily and other aquatic plants. These lights are grouped like artificial plants or their attachments to lit up in the middle of the pond.

Place a floating lighted fountain in the center or deepest part of the pond for the double benefit of a light show with aeration. Fountains can give a variety of spray and light shows, come with control panels, timers, and cords, and will need an electric source and an anchor. Solar floating lighted fountains are a bit more expensive but worth the time-saving installation effort that is saved, as well as the electricity.

Install underwater pond lights around the edge of the pond just under the water for a more dramatic effect. Space lights one to three feet apart, depending on how much light is desired. Underwater lights require a fixture for the light, and a cable, plus a transformer and something to anchor the light in the pond, usually a cement weight or a stake secured well into the earth.

In addition to this, you would also require an outdoor GFCI receptacle to power the electrical lights you have installed in the pond. Make sure, you secure the GFCI outlet in a weatherproof cover.

Scott Rodgers is a highly talented author on electrician works. His commendable exposure on lighting works has helped a lot many Orinda Electricians and Kirkville Electricians . Get a totally unique version of this article from our article submission service

Instructions To Convert A Chandelier To A Swag Lamp

Leave a reply

Astonishing feature of the home lighting fixtures even make a dull place to bright. One can undoubtedly choose chandeliers so as to enhance the appearance of their drawing rooms. These are a great source to make every place bloom.

Chandeliers meant to be directly wired into the ceiling and are not an option for those who want to mess with the wiring. Even if something goes wrong with the chandelier, you cannot cure that unless you check the wiring placed under the ceiling. This seems quite a troublesome task. Also, the chandeliers are operated from a breaker and are not plug- in cord type. But, you have far better option than laying the circuitry under the ceiling. You can convert the existing chandelier into the swag light.

Converting the chandelier into the swag light don’t require you to be an electrician. Rather, one can simply do the task. Moreover, all most all the home improvement stores provide the swag kits. For those who want to convert their chandelier into the swag lights can refer the steps below in the article.

Firstly, strip off one inch of wire covering from each of the wire that extends to your chandelier. Take notice of the special markings or the wire color so as to connect them properly. Swag light kit consists of an electric cord which is further connected to the wires of the chandelier. Make use of an electric tape or plastic wire caps to insulate the wiring.

Now, the next step is to install the cord cover. In order to cover all the electrical wires, cover them with the cord cover. Further, thread the cord with the chain so as to hang the fixture with the ceiling.

In order to prevent the heavy chandelier from falling onto someone’s head, two different hooks are installed. First hook is installed at some stronger ceiling stud or the joist to which the chandelier thereafter is fastened. Second hook is then placed at the ceiling near the electric outlet.

Hang the chandelier with the first ceiling hook and drape the excess cord to the second one. The hook can now, adequately support the weight of the chandelier.

Now, plug in the cord into the electrical outlet and inspect your installation by turning on the chandelier. Make sure, you connect the wires properly matching the colors.

Scott Rodgers is a highly skilled author on electrician works. His commendable exposure on lighting works has helped a lot many Williamsburg Electricians and Ellicott City Electricians . This and other unique content ” articles are available with free reprint rights.